Displaying the radius settings – Allied Telesis AT-S63 User Manual
Page 331
AT-S63 Management Software Web Browser Interface User’s Guide
Section IV: Security
331
Displaying the RADIUS Settings
To display the RADIUS settings on the switch, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. Select the Server-based Authentication tab.
The Server-based Authentication tab is shown in Figure 125 on
page 327.The upper part of the page shows if server-based
authentication is enabled or disabled and the authentication
method. The lower part of the page allows you to view either the
settings for the current authentication method.
3. In the lower portion of the page, click RADIUS Settings.
4. Click View.
The RADIUS Client Configuration page is shown in Figure 126.
Figure 128. RADIUS Client Configuration Page
The upper portion of the page displays the following information:
Global Encryption Key
The global encryption secret.