Creating a new snmpv1 and snmpv2c community – Allied Telesis AT-S63 User Manual
Page 56
Advertising
Chapter 4: SNMPv1 and SNMPv2c
56
Section I: Basic Features
Creating a New SNMPv1 and SNMPv2c Community
To create a new SNMPv1 and SNMPv2c community, perform the
following procedure:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 9 on page 54.
3. In the SNMPv1 & SNMPv2c section, click Configure.
The SNMPv1 & SNMPv2c Communities tab is shown in Figure 10.
Figure 10. SNMPv1 & SNMPv2c Communities Tab
4. Click Add.
Advertising