Displaying user table entries – Allied Telesis AT-S63 User Manual
Page 259
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features
259
Displaying User
Table Entries
To display entries in the SNMPv3 User Table, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 94.
Figure 94. SNMP Tab (Monitoring)
3. In the SNMPv3 section, click the button next to View User Table and
then click View at the bottom of the tab.
Advertising