Allied Telesis AT-S63 - Manual (Page 343)

AT-S63 Management Software Web Browser Interface User’s Guide
Section IV: Security 343
3. To see the status of the port, click the port and click Status. You can
select more than one port at a time.
The Port Access Port Status page is shown in Figure 134.
Figure 134. Port Access Port Status Page
The Port Access Port Status page displays a table that contains the
following columns of information:
Port
The port number.
Port Role
The port role: None, Authenticator, or Supplicant.
Status
The options include: Initialize, Disconnected, and so forth.
Additional Info.
More information about the port including the MAC address.
Displaying the
Port Settings
To display the port-based network access control port settings, perform
the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. From the Monitoring menu, select the Security option.
The Security page opens with the 802.1x Port Access tab selected
by default, as shown in Figure 133 on page 342.
3. To review the port access settings, click OK to close the Port Access
Port Status page and return to the 802.1x Port Access tab
4. To see the port settings, click the port and click Settings. You can
select more than one port at a time.