Allied Telesis AT-S63 - Manual (Page 293)

AT-S63 Management Software Web Browser Interface User’s Guide
Section III: VLANs 293
Displaying the GVRP State Machine
To display the GVRP state machine, perform the following procedure:
1. From the Home page, select Monitoring.
The System page is displayed with the General tab selected by
default, as shown in Figure 6 on page 44.
2. From the Monitoring menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab displayed
by default, as shown in Figure 25 on page 94.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 108 on page 289.
4. In the View GVRP Parameters section, click View GVRP State
Machine for VLAN and enter the VLAN number in the box.
5. Click View.
The GVRP State Machine for VLAN page is shown in Figure 111.
Figure 111. GVRP State Machine for VLAN Page
The GVRP State Machine for VLAN page provides the information
shown in Table 7
.
Table 7. GVRP State Machine Parameters
Parameter Meaning
Port Port number on the switch; this port belongs to
the GARP application. If the GARP application
has no ports, “No ports have been assigned” is
displayed.