Allied Telesis AT-S63 User Manual
Page 311
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Section IV: Security
311
The Keys tab is shown in Figure 117.
Figure 117. Keys Tab (Monitoring)
The Keys tab displays a table that contains the following columns
of information:
ID
The identification number of the key.
Algorithm
The algorithm used in creating the encryption. This is always RSA
- Private.
Length
The length of the key in bits.
Digest
The CRC32 value of the MD5 digest of the public key.
Description
The key’s description.
You use these keys when you configure Secure Sockets Layer
(SSL) or Secure Shell (SSH). To configure SSL you must use the
AT-S63 menus or CLI interface. To configure SSH, refer to Chapter
21, ”Secure Shell (SSH)” on page 317.
Advertising