Allied Telesis AT-S63 - Manual (Page 67)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Features 67
The Enhanced Stacking tab is shown in Figure 15.
Figure 15. Enhanced Stacking Tab (Configuration)
4. Click the desired enhanced stacking status for the switch. The default
is Slave.
5. Click Apply.
The new enhanced stacking status is immediately activated on
the switch.
6. To permanently save the change, return to the General tab on the
System page and click Save Changes.
For more information about what the Save Changes button does,
refer to ”Saving Your Parameter Changes” on page 36.