Allied Telesis AT-S63 - Manual (Page 247)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 247
v1
Select this value to associate the Security Name, or User Name,
with the SNMPv1 protocol.
v2c
Select this value to associate the Security Name, or User Name,
with the SNMPv2c protocol.
v3
Select this value to associate the Security Name, or User Name,
with the SNMPv3 protocol.
8. In the Security Name field, enter a User Name that you previously
configured with the SNMPv3 User Table.
See ”Creating a User Table Entry” on page 207.
9. In the Security Level field, select one of the following Security Levels:
Note
The value you configure for the Security Level must match the value
configured for the User Name in the User Table Menu. See ”Creating
a User Table Entry” on page 207.
No Authentication/Privacy
This option represents neither an authentication nor privacy
protocol. Select this security level if you do not want to
authenticate SNMP entities and you do not want to encrypt
messages using a privacy protocol. This security level provides the
least security.
Note
If you have selected SNMPv1 or SNMPv2c as the Security Model, you
must select No Authentication/Privacy as the Security Level.
Authentication
This option represents authentication, but no privacy protocol.
Select this security level if you want to authenticate SNMP users,
but you do not want to encrypt messages using a privacy
protocol.You can select this value if you configured the Security
Model parameter with the SNMPv3 protocol.
Privacy
This option represents authentication and the privacy protocol.
Select this security level to allow authentication and encryption.
This level provides the greatest level of security. You can select
this value if you configured the Security Model parameter with
the SNMPv3 protocol.