Allied Telesis AT-S63 - Manual (Page 281)

AT-S63 Management Software Web Browser Interface User’s Guide
Section III: VLANs 281
Displaying VLANs
To display the current VLANs on a switch, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. From the Monitoring menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab selected
by default, as shown in Figure 25 on page 94.
3. Select the VLAN tab.
The VLAN tab is shown in Figure 105.
Figure 105. VLAN Tab (Monitoring)
The upper part of the tab displays the following information:
Mode
The VLAN mode. The possible settings are:
User Configured - This mode supports port-based and tagged
VLANs.
Multiple 802.1Q - The IEEE 802.1Q-compliant multiple VLAN
mode.