Rj-45 serial terminal port default settings, Sntp default settings – Allied Telesis AT-S63 User Manual
Page 360
Advertising
Appendix A: AT-S63 Default Settings
360
Note
Login names and passwords are case sensitive.
RJ-45 Serial
Terminal Port
Default Settings
The following table lists the RJ-45 serial terminal port default settings.
SNTP Default
Settings
The following table lists the SNTP default settings.
Console Disconnect Timer Interval
10 minutes
Management Interface Setting
Default
RJ-45 Port Setting
Default
Data Bits
8
Stop Bits
1
Parity
None
Flow Control
None
Baud Rate
9600 bps
SNTP Setting
Default
System Time
00:00:00 on January 1,
1970
SNTP Status
Disabled
SNTP Server
0.0.0.0
UTC Offset
+0
Daylight Savings Time (DST)
Enabled
Poll Interval
600 seconds
Advertising