Allied Telesis AT-S63 - Manual (Page 92)

Chapter 7: MAC Address Table
92 Section I: Basic Features
Deleting Unicast and Multicast MAC Addresses
To delete a static or dynamic unicast or multicast MAC address from the
switch, perform the following procedure:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.
2. From the Configuration menu, select the Layer 2 option.
The Layer 2 page opens with the MAC Address tab selected by
default, as shown in Figure 23 on page 90.
3. Display the MAC addresses on the switch by selecting one of the
options.
For detailed instructions, refer to ”Displaying the MAC Address
Tables” on page 94.
4. Click the button next to the MAC address that you want to delete from
the switch.
5. Click Remove.
Note
You cannot delete a switch’s MAC address, an STP BPDU MAC
address, or a broadcast address.
6. To permanently save the change, return to the General tab on the
System page and click Save Changes.
For more information about what the Save Changes button does,
refer to ”Saving Your Parameter Changes” on page 36.