Allied Telesis AT-S63 - Manual (Page 110)

Chapter 9: Port Mirroring
110 Section I: Basic Features
Creating a Port Mirror
To create a port mirror, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.
2. From the Configuration menu, select the Layer 1 option.
The Layer 1 page opens with the Port Settings tab displayed by
default, as shown in Figure 18 on page 74.
3. Select the Port Mirroring tab.
The Port Mirroring tab is shown in Figure 31.
Figure 31. Port Mirroring Tab (Configuration)
This tab displays any port mirror already existing on the switch. If
the Mirror to Port column contains a 0 (zero), there is no port
mirror.
4. Click Modify.