Allied Telesis AT-S63 - Manual (Page 94)

Chapter 7: MAC Address Table
94 Section I: Basic Features
Displaying the MAC Address Tables
To view the MAC address table, perform the following procedure:
1. From the Home page, select Monitoring.
The System page is displayed with the General tab selected by
default, as shown in Figure 6 on page 44.
2. From the Monitoring menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab displayed
by default, as shown in Figure 25.
Figure 25. MAC Address Tab (Monitoring)
The tab contains two sections. The upper section displays unicast
addresses; the lower part displays multicast addresses. The
options function the same in both sections, and are described
below. You can select only one option at a time.
View All
Displays all dynamic addresses learned on the ports of the switch
and all static addresses that have been assigned to the ports.