Allied Telesis AT-S63 - Manual (Page 282)

Chapter 17: Virtual LANs
282 Section III: VLANs
Multiple - The non-IEEE 802.1Q-compliant multiple VLAN mode.
Management VLAN ID
VLAN ID of the management VLAN.
The lower part of the tab displays a table that contains the
following columns of information:
VLAN ID
The VID number assigned to the VLAN.
(Client) Name
The name of the VLAN. If the switch is operating in one of the
multiple VLAN modes, the names of the VLANs start with “Client,”
with the exception of the VLAN containing the uplink port, which
starts with “Uplink.”
Uplink Port
This column is applicable only when the switch is operating in one
of the two multiple VLAN modes. The column lists the port that is
functioning as the uplink port for all the other ports on the switch.
VLAN Type
The VLAN type. The possible settings are:
Port Based - The VLAN is a port-based or tagged VLAN.
GARP - The VLAN was automatically created by GARP.
Protocol
The protocol associated with this VLAN. The possible settings are:
Blank - The VLAN is a port-based or tagged VLAN.
GARP - The VLAN is a dynamic GVRP VLAN or the port is a dynamic
GVRP port of a static VLAN.
Tagged(T)/Untagged(U) Port
Lists the ports of the VLAN. Tagged ports are designated with a “T”
and untagged ports with a “U.”