Chapter 11, Event log – Allied Telesis AT-S63 User Manual
Page 127
Section II: Advanced Features
127
Chapter 11
Event Log
This chapter describes the event log that allows you to view information
about network activity. Sections in the chapter include:
❑ ”Enabling or Disabling the Event Log” on page 128
❑ ”Displaying Events” on page 130
❑ ”Disabling the Event Log” on page 137
❑ ”Clearing the Event Log” on page 138
❑ ”Saving the Event Log to a File” on page 139
For more information about the event log, refer to the AT-S63
Management Software Web Browser Interface User’s Guide.
Note
The event log, even when disabled, logs all AT-S63 initialization
events that occur when the switch is reset or power cycled. Any
switch events that occur after AT-S63 initialization are entered into
the log only if you enable the event log. The default setting for the
event log is disabled.