Stp, rstp, and mstp default settings, Spanning tree switch settings, Stp default settings – Allied Telesis AT-S63 User Manual
Page 369: Rstp default settings
AT-S63 Management Software Web Browser Interface User’s Guide
369
STP, RSTP, and MSTP Default Settings
This section provides the spanning tree, STP RSTP, and MSTP, default
settings.
Spanning Tree
Switch Settings
The following table describes the Spanning Tree Protocol default
settings for the switch.
STP Default
Settings
The following table describes the STP default settings.
RSTP Default
Settings
The following table describes the RSTP default settings.
STP Switch Setting
Default
Spanning Tree Status
Disabled
Active Protocol Version
RSTP
STP Setting
Default
Bridge Priority
32768
Bridge Hello Time
2
Bridge Forwarding
15
Bridge Max Age
20
Port Cost
Automatic -Update
Port Priority
128
RSTP Setting
Default
Force Version
RSTP
Bridge Priority
32768
Bridge Hello Time
2
Bridge Forwarding
15
Bridge Max Age
20
Edge Port
Yes
Point-to-Point
Auto Detect
Port Cost
Automatic Update