Allied Telesis AT-S63 - Manual (Page 256)

Chapter 16: SNMPv3
256 Section II: Advanced Features
4. Click the button next to the SNMPv3 Community Table entry that you
want to change and then click Modify.
The Modify SNMPv3 Community page is shown in Figure 93.
Figure 93. Modify SNMPv3 Community Page
5. In the Community Name field, enter a Community Name of up to 64-
alphanumeric characters.
The value of the Community Name parameter acts as a password
for the SNMPv3 Community Table entry. This parameter is case
sensitive.
Note
Allied Telesyn recommends that you select SNMP Community
Names carefully to ensure these names are known only to
authorized personnel.
6. In the Security Name field, enter a name of an SNMPv1 and SNMPv2c
user.
This name must be unique. Enter a value of up to 32 alphnumeric
characters.
Note
Do not use a value configured with the User Name parameter in the
SNMPv3 User Table.
7. In the Transport Tag field, enter a name of up to 32 alphnumeric
characters.