Allied Telesis AT-S63 - Manual (Page 346)

Chapter 23: 802.1x Port-based Network Access Control
346 Section IV: Security
RADIUS Accounting
The AT-S63 management software supports RADIUS accounting for
ports operating in the Authenticator role. The accounting information
sent by the switch to a RADIUS server includes the date and time when
clients log on and log off, as well as the number of packets sent and
received by a switch port during a client session. For background
information on this feature, refer to Chapter 29, “802.1x Port-based
Network Access Control” in the AT-S63 Management Software Menus
Interface User’s Guide. This feature is disabled by default on the switch.
Configuring
RADIUS
Accounting
To configure RADIUS accounting, perform the following procedure:
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.
2. From the Configuration menu, select the Security option.
The Security page is displayed with the 802.1x Port Access tab
selected by default, as shown in Figure 137.
Figure 137. 802.1x Port Access Tab (Configuration)