Modifying an snmpv1 and snmpv2c community – Allied Telesis AT-S63 User Manual
Page 59
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Features
59
Modifying an SNMPv1 and SNMPv2c Community
To modify an SNMPv1 and SNMPv2c community, perform the following
procedure:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 9 on page 54.
3. In the SNMPv1 & SNMPv2c section, click Configure.
The SNMPv1 & SNMPv2c Communities tab is shown in Figure 10
on page 56.
4. Click the button next to the community name and click Modify.
The Modify SNMPv1 & SNMPv2c Community page is shown in
Figure 12.
Figure 12. Modify SNMPv1 & SNMPv2c Community Page
Advertising