Allied Telesis AT-S63 - Manual (Page 123)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 123
1. From the home page, select Configuration.
The System page is displayed with the General tab selected by
default.
2. Select the System Utilities tab.
The System Utilities tab is shown in Figure 35.
Figure 35. System Utilities Tab (Configuration)
Note
You use the top portion of the tab to return the switch to its factory
default settings. For instructions, refer to ”Returning the AT-S63
Management Software to the Factory Default Values” on page 50.
3. In the TFTP Server IP Address field, enter the IP address of the network
node that contains the TFTP server software.
4. In the TFTP Operation field, click Download.
5. In the TFTP Remote Filename field, enter the filename of the file on
the TFTP server to be downloaded to the switch.
6. In the TFTP Local Filename field, enter a name for the file. This is the
name that the switch uses to store the file in its file system. If you are
downloading the AT-S63 image file, enter “ats62.img” as the filename.
7. For the TFTP File Type, select one of the following: