Allied Telesis AT-S63 - Manual (Page 326)

Chapter 22: TACACS+ and RADIUS
326 Section IV: Security
not responded, the switch queries the next TACACS+ server in the
list. If there are no more servers, the switch defaults to the
standard Manager and Operator accounts. The default is 30
seconds. The range is 1 to 30 seconds.
IP Address and Encryption Key
Use these fields to specify the IP addresses and encryption secrets
of up to three network servers containing TACACS+ server
software. You can leave an encryption field blank if you entered
the server’s secret in the Global Secret field.
5. Click Apply.
6. To permanently save the change, return to the General tab on the
System page and click Save Changes.
For more information about what the Save Changes button does,
refer to ”Saving Your Parameter Changes” on page 36.