Deleting a port mirror – Allied Telesis AT-S63 User Manual

Page 115

Advertising
background image

AT-S63 Management Software Web Browser Interface User’s Guide

Section I: Basic Features

115

Deleting a Port Mirror

To delete a port mirror, perform the following procedure:

1. From the home page, select Configuration.

The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.

2. From the Configuration menu, select the Layer 1 option.

The Layer 1 page opens with the Port Settings tab displayed by
default, as shown in Figure 18 on page 74.

3. Select the Port Mirroring tab.

The Port Mirroring tab is shown in Figure 31 on page 110.

4. Click Modify.

The Modify Mirror page is shown in Figure 32 on page 111.

5. Click the Enable Mirror checkbox to remove the check and disable

the mirror.

6. Click Apply.

7. Click the destination port, which is white, so that it is black.

8. Click Apply.

9. To permanently save the change, return to the General tab on the

System page and click Save Changes.

For more information about what the Save Changes button does,
refer to ”Saving Your Parameter Changes” on page 36.

Advertising