Allied Telesis AT-S63 - Manual (Page 310)

Chapter 20: Encryption Keys, PKI, and SSL
310 Section IV: Security
Displaying the Encryption Keys
To configure the encryption keys, you must use the AT-S63 menus or
command line interface. For more information about encryption keys,
refer to the AT-S63 Management Software Menus Interface User’s Guide.
To display the encryption keys, perform the following procedure:
1. From the Home page, select Monitoring.
The System page is displayed with the General tab selected by
default, as shown in Figure 6 on page 44.
2. From the Monitoring menu, select the Security option.
The Security page is displayed with the 802.1x Port Access tab
displayed by default, as shown in Figure 116.
Figure 116. 802.1x Port Access Tab (Monitoring)
3. Select the Keys tab.