Allied Telesis AT-S63 - Manual (Page 291)

AT-S63 Management Software Web Browser Interface User’s Guide
Section III: VLANs 291
Displaying the GVRP Port Configuration
To display the GVRP port configuration, perform the following
procedure:
1. From the Home page, select Monitoring.
The System page is displayed with the General tab selected by
default, as shown in Figure 6 on page 44.
2. From the Monitoring menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab displayed
by default, as shown in Figure 25 on page 94.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 108 on page 289.
4. In the View GVRP Parameters section, click View Port Configuration.
5. Click View.
The GVRP Port Configuration page is shown in Figure 109.
Figure 109. GVRP Port Configuration Page
The GVRP Port Configuration page provides the following
information:
Port Number
The port number.
Mode
The port mode, either Normal or None.