Allied Telesis AT-S63 - Manual (Page 45)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Features 45
DHCP/BOOTP
The status of the DHCP and BOOTP client software. If enabled, the
switch is obtaining its IP information from a DHCP and BOOTP
server on the network. If disabled, the IP address must be
manually entered.
MAC Address Aging Timer
The time interval an inactive dynamic MAC address can remain in
the MAC address table before it is deleted.
IP Address
The switch’s IP address.
Subnet Mask
The switch’s subnet mask.
Default Gateway
The IP address of a router for remote management.
System Up Time
The length of time since the switch was last reset or power cycled.
The System Software section displays the following information:
Application Software
The version number and build date of the AT-S63 management
software.
Bootloader
The version number and build date of the AT-S63 bootloader.
The Hardware section displays the following information:
Model Name
The model name.
Serial Number
The switch serial number.
Temperature (Deg.C)
The current system temperature.
Upper Temp. Threshold (Deg C)
The upper threshold for the switch temperature.
Fan 1 Speed RPM
Fan 2 Speed RPM
The speed of the system fan(s).
The Voltage section provides the current voltage of the six power
supplies in the switch, identified as 2.5 V, 3.3 V, 5 V, 1.8 V, 1.25 V,
and 12 V.