Allied Telesis AT-S63 - Manual (Page 213)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 213
DES
Select this value to make the DES privacy (or encryption) protocol
the privacy protocol for this User Table entry. With this selection,
messages transmitted between the host and the switch are
encrypted with the DES protocol.
None
Select this value if you do not want a privacy protocol for this User
Table entry. With this selection, messages transmitted between
the host and the switch are not encrypted.
9. In the Privacy Password field, enter a privacy password of up to 32
alphnumeric characters.
10. In the Confirm Privacy Password field, re-enter the privacy password.
11. In the Storage Type field, enter one of the following storage options
for this User Table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the SNMPv3 User Table. After making changes to an
SNMPv3 User Table entry with a Volatile storage type, Save
Changes does not appear on the General tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the SNMPv3 User Table. After making changes to an SNMPv3 User
Table entry with a NonVolatile storage type, Save Changes
appears on the General tab. Allied Telesyn recommends this
storage type.
Note
The Row Status parameter is a read-only field in the web browser
interface. The Active value indicates the SNMPv3 User Table entry
takes effect immediately.
12. Click Apply to update the SNMPv3 User Table.
13. To save your changes, return to the General tab and click Save
Changes.