Adding static unicast and multicast mac addresses – Allied Telesis AT-S63 User Manual
Page 90
Advertising
Chapter 7: MAC Address Table
90
Section I: Basic Features
Adding Static Unicast and Multicast MAC Addresses
This section contains the procedure for assigning a static unicast or
multicast address to a port on the switch. You can assign up to 255 static
MAC addresses per port.
To add a static address to the MAC address table, perform the following
procedure:
1. From the Home page, select Configuration.
The System page is displayed with the General tab selected by
default, as shown in Figure 5 on page 40.
2. From the Configuration menu, select the Layer 2 option.
The Layer 2 page opens with the MAC Address tab selected by
default, as shown in Figure 23.
Figure 23. MAC Address Tab (Configuration)
Advertising