Allied Telesis AT-S63 - Manual (Page 47)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Features 47
Operator Password
Confirm Operator Password
Use these parameters to change the operator’s login password for
the switch. The password can be from 0 to 16 characters in length.
The same password is used for both local and remote
management sessions. To create a new password, enter the new
password into both fields. The default password for operator is
“operator.” The password is case sensitive.
Caution
Do not use spaces or special characters, such as asterisks (*) and
exclamation points (!), in a password if you are managing the switch
from a web browser. Many web browsers cannot handle special
characters in passwords.
Note
A change to a password is immediately activated on the switch. You
are prompted for the new password the next time you log in.
3. Click Apply to activate your change on the switch.
4. Click Save Changes to permanently save your change. (This button is
not displayed if there are no changes to save.)