Allied Telesis AT-S63 - Manual (Page 255)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 255
10. Click Apply.
11. To save your changes, return to the General tab and click Save
Changes.
Deleting an
SNMPv3
Community
Table Entry
To delete an entry in the SNMPv3 Community Table, perform the
following procedure:
1. From the home page, select Configuration.
The Configuration System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 40.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 69 on page 205.
3. In the SNMPv3 section, click the button next to Configure
Community Table and then click Configure at the bottom of the tab.
The SNMPv3 Community Table tab is shown in Figure 91 on page
253.
4. Click the button next to the SNMPv3 Community Table entry that you
want to delete and then click Remove.
A warning message is displayed.
5. Click OK.
6. To save your changes, return to the General tab and click Save
Changes.
Modifying an
SNMPv3
Community
Table Entry
To modify an entry in the SNMPv3 Community Table, perform the
following procedure:
1. From the home page, select Configuration.
The Configuration System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 40.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 69 on page 205.
3. In the SNMPv3 section, click the button next to Configure
Community Table, and then click Configure at the bottom of the
tab.
The SNMPv3 Community Table tab is shown in Figure 91 on page
253.