Displaying the gvrp counters – Allied Telesis AT-S63 User Manual
Page 296
Advertising
Chapter 18: GARP VLAN Registration Protocol (GVRP)
296
Section III: VLANs
Displaying the GVRP Counters
To display the GVRP counters, perform the following procedure:
1. From the Home page, select Monitoring.
The System page is displayed with the General tab selected by
default, as shown in Figure 6 on page 44.
2. From the Monitoring menu, select the Layer 2 option.
The Layer 2 page is displayed with the MAC Address tab displayed
by default, as shown in Figure 25 on page 94.
3. Select the GVRP tab.
The GVRP tab is shown in Figure 108 on page 289.
4. In the View GVRP Parameters section, click View GVRP Counters.
5. Click View.
The GVRP Counters page is shown in Figure 112.
Figure 112. GVRP Counters Page
Advertising