Allied Telesis AT-S63 - Manual (Page 211)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 211
4. Click the button next to the User Table entry that you want to delete
and then click Remove.
A warning message is displayed.
5. Click OK.
6. To save your changes, return to the General tab and click Save
Changes.
Modifying a
User Table
Entry
To modify an entry SNMPv3 User Table, perform the following
procedure:
1. From the home page, select Configuration.
The Configuration System page is displayed with the General tab
selected by default, as shown in Figure 5 on page 40.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 69 on page 205.
3. In the SNMPv3 section, click the button next to Configure User Table
and then click Configure.
The SNMPv3 User Table tab is shown in Figure 70 on page 208.
4. Click the button next to the SNMPv3 user that you want to change
and then click Modify.
The Modify SNMPv3 User page is shown in Figure 72.
Figure 72. Modify SNMPv3 User Page