Allied Telesis AT-S63 - Manual (Page 333)

Section IV: Security 333
Chapter 23
802.1x Port-based Network
Access Control
This chapter contains instructions on how to configure the 802.1x Port-
based Network Access Control feature on the switch. The chapter
contains the following sections:
❑ ”Setting Port Roles” on page 334
❑ ”Enabling or Disabling 802.1x Port-based Network Access
Control” on page 336
❑ ”Configuring Authenticator Port Parameters” on page 337
❑ ”Configuring Supplicant Port Parameters” on page 340
❑ ”Displaying the Port-based Network Access Control Parameters”
on page 342
❑ ”RADIUS Accounting” on page 346
Note
For background information on port-based network access control,
refer to Chapter 29, “802.1x Port-based Network Access Control,” in
the AT-S63 Management Software Menus Interface User’s Guide.