Allied Telesis AT-S63 - Manual (Page 197)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 197
Displaying the MSTP Port Configuration
To display the MSTP port configuration, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. From the Monitoring menu, select the Layer 2 option.
The Monitoring Layer 2 page is displayed with the MAC Address
tab selected by default, as shown in Figure 25 on page 94.
3. Select the Spanning Tree tab.