Allied Telesis AT-S63 - Manual (Page 130)

Chapter 11: Event Log
130 Section II: Advanced Features
Displaying Events
Each time that you want to view the event log, you must choose how
and what you want displayed. The event log settings are not saved.
To specify the type of events you want to display in the event log,
perform the following procedure:
1. From the home page, select Monitoring.
The System page is displayed with the General tab selected by
default, as shown in Figure 6 on page 44.
Note
You can also display events by selecting Configuration from the
home page and then the Event Log tab. The tab contains the same
Filter Settings and Actions section as described in this procedure:
2. Select the Event Log tab.
The Event log tab is shown in Figure 37.
Figure 37. Event Log Tab (Monitoring)
3. In the Filter Settings and Actions section, for Log Location, click one
of the following: