Allied Telesis AT-S63 - Manual (Page 95)

AT-S63 Management Software Web Browser Interface User’s Guide
Section I: Basic Features 95
View Static
Displays just the static addresses assigned to the ports on the
switch.
View Dynamic
Displays only the dynamic addresses learned on the ports on the
switch.
View MAC Addresses on Port
Displays the dynamic and static MAC addresses of a particular
port. You can specify more than one port at a time.
View MAC Addresses for VLAN
Displays the static and dynamic addresses learned on the tagged
and untagged ports of a specific VLAN. You specify the VLAN by
entering the VLAN ID number. You can specify only one VLAN at a
time.
View MAC Address
Displays the port number on which a MAC address was assigned
or learned.
In some situations, you might want to know on which port a
particular MAC address was learned. You could display the MAC
address table and scroll through the list looking for the MAC
address. But if the switch is part of a large network, finding the
address could prove difficult.
The View MAC Address option allows you to specify the MAC
address and let the AT-S63 management software automatically
locate the port on the switch where the device is connected.
3. After you select an option, click View.