Allied Telesis AT-S63 - Manual (Page 221)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 221
Figure 76. SNMPv3 Access Table Tab (Configuration)
4. To create an SNMPv3 Access Table entry, click Add.
The Add New SNMPv3 Access page is shown in Figure 77.
Figure 77. Add New SNMPv3 Access Page
5. In the Group Name field, enter a descriptive name of the group.
The Group Name can consist of up to 32 alphnumeric characters.
You are not required to enter a unique value here because the
SNMPv3 Access Table entry is indexed with the Group Name,
Security Model, and Security Level parameter values. However, a
unique group name makes it easier for you to tell the groups
apart.
There are four default values for this field that are reserved for
SNMPv1 and SNMPv2c implementations:
❑ defaultV1GroupReadOnly
❑ defaultV1GroupReadWrite
❑ defaultV2cGroupReadOnly
❑ defaultV2cGroupReadWrite