Displaying target address table entries – Allied Telesis AT-S63 User Manual
Page 265
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features
265
Displaying
Target Address
Table Entries
To display entries in the SNMPv3 Target Address Table, perform the
following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. Select the SNMP Tab.
The SNMP tab is shown in Figure 94 on page 259.
3. In the SNMPv3 section, lick the button next to View Target Address
Table and then click View at the bottom of the tab.
The SNMPv3 Target Address Table tab is shown in Figure 100.
Figure 100. SNMPv3 Target Address Table Tab (Monitoring)
Advertising