Allied Telesis AT-S63 - Manual (Page 223)

AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features 223
authenticate SNMP entities and you do not want to encrypt
messages using a privacy protocol. This option provides the least
security.
Note
If you have selected SNMPv1 or SNMPv2c, N-NoAuthNoPriv is the
only security level you can select.
Authentication
This option permits an authentication protocol, but not a privacy
protocol. Select this security level if you want to authenticate
SNMP users, but you do not want to encrypt messages using a
privacy protocol.You can select this value if you configured the
Security Model parameter with the SNMPv3 protocol.
Privacy
This option represents authentication and the privacy protocol.
Select this security level to allow authentication and encryption.
This level provides the greatest level of security. You can select
this value if you configured the Security Model parameter with
the SNMPv3 protocol.
Note
The Context Match field is a read only field. The Context Match field
is always set to Exact.
11. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an
entry in the Access Table. After making changes to an Access
Table entry with a Volatile storage type, Save Changes does not
appear on the General tab.
NonVolatile
Select this storage type if you want the ability to save an entry in
the Access Table. After making changes to an Access Table entry
with a NonVolatile storage type, Save Changes appears on the
General tab. Allied Telesyn recommends this storage type.
Note
The Row Status parameter is a read-only field in the web browser
interface. The Active value indicates the SNMPv3 Access Table entry
will take effect immediately.
12. Click Apply.