Displaying the qos schedule – Allied Telesis AT-S63 User Manual
Page 152
Advertising
Chapter 12: Quality of Service
152
Section II: Advanced Features
Displaying the QoS Schedule
To display the QoS schedule, perform the following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44
2. From the Monitoring menu, select the QoS option.
The QoS page is displayed with the CoS tab selected by default, as
shown in Figure 43 on page 150.
3. Select the Scheduling tab.
The Scheduling tab is shown in Figure 45.
Figure 45. QoS Scheduling Tab (Monitoring)
The upper section displays the CoS priority to egress queue
assignments. The lower section displays the egress weight
settings.
Advertising