Allied Telesis AT-S63 - Manual (Page 264)

Chapter 16: SNMPv3
264 Section II: Advanced Features
Displaying
Notify Table
Entries
To display entries in the SNMPv3 Notify Table, perform the following
procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 94 on page 259.
3. In the SNMPv3 section, click the button next to View Notify Table
and then click View at the bottom of the tab.
The SNMPv3 Notify Table tab is shown in Figure 99.
Figure 99. SNMPv3 Notify Table Tab (Monitoring)