Allied Telesis AT-S63 - Manual (Page 62)

Chapter 4: SNMPv1 and SNMPv2c
62 Section I: Basic Features
Displaying the SNMPv1 and SNMPv2c Communities
To display the SNMPv1 and SNMPv2c communities, perform the
following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 13.
Figure 13. SNMP Tab (Monitoring)
3. In the SNMPv1 & SNMPv2c section, click View.