Displaying snmpv3 community table entries – Allied Telesis AT-S63 User Manual
Page 267
Advertising
AT-S63 Management Software Web Browser Interface User’s Guide
Section II: Advanced Features
267
Displaying
SNMPv3
Community
Table Entries
To display entries in the SNMPv3 Community Table, perform the
following procedure:
1. From the Home page, select Monitoring.
The Monitoring System page is displayed with the General tab
selected by default, as shown in Figure 6 on page 44.
2. Select the SNMP tab.
The SNMP tab is shown in Figure 94 on page 259.
3. In the SNMPv3 section, click the button next to View Community
Table and then click View at the bottom of the tab.
The SNMPv3 Community Table tab is shown in Figure 102.
Figure 102. SNMPv3 Community Table Tab (Monitoring)
Advertising