Document Outline

• Hinweis_TIs_im Anhang der BU0200_GB_1114
  • Additional information to BU 0200
• BU0200_GB_4411
  • 1 General information
    • 1.1 Overview
    • 1.2 Delivery
    • 1.3 Scope of supply
    • 1.4 Safety and installation information
    • 1.5 Certifications
      • 1.5.1 European EMC Directive
      • 1.5.2 Approval for UL and cUL
      • 1.5.3 C-Tick labelling
      • 1.5.4 RoHS compliance
    • 1.6 Nomenclature / type codes
      • 1.6.1 Type codes / Frequency inverter - basic device
      • 1.6.2 Type codes / Adapter unit - frequency inverter
      • 1.6.3 Type codes / Adapter unit - Technology Unit
      • 1.6.4 Type codes / Optional modules
    • 1.7 Version with protection class IP55 / IP66
  • 2 Assembly and installation
    • 2.1 Installation and assembly
      • 2.1.1 Mounting the adapter unit
      • 2.1.2 Adapters for Different Motors
      • 2.1.3 Installing the SK 2xxE
      • 2.1.4 Optional locations for the "SK TI4-…" adapter unit
    • 2.2 SK 2xxE dimensions
      • 2.2.1 Power rating / Motor size
      • 2.2.2 SK 2xxE mounted on motor
      • 2.2.3 Wall mounting of the SK 2xxE
        • 2.2.3.1 Wall-mounting kit SK TIE4-WMK-L-…
        • 2.2.3.2 Wall-mounting kit SK TIE4-WMK-1 (up to -3)
        • 2.2.3.3 Frequency inverter installation positions with wall-mounting kit
    • 2.3 Brake resistor (BR)
      • 2.3.1 Internal brake resistor SK BRI4-…
      • 2.3.2 External brake resistor SK BRE4-…
      • 2.3.3 External brake resistor dimensions
      • 2.3.4 Brake resistor, electrical data
    • 2.4 Overvoltage filter SK CIF
    • 2.5 Wiring guidelines
    • 2.6 Electrical Connection
    • 2.7 Electrical connection of the power unit
      • 2.7.1 Mains connections (L1, L2, L3, EARTH)
      • 2.7.2 Motor cable (U, V, W, earth)
      • 2.7.3 Brake resistor connection (-B, +B)
      • 2.7.4 Electromechanical brake (only SK 2x5E)
      • 2.7.5 Mains supply jumpers
    • 2.8 Electrical connection of SK 2xxE control unit
      • 2.8.1 SK 2xxE control terminal versions
      • 2.8.2 Details of the SK 2x0E control connections
      • 2.8.3 Details of the SK 2x5E control connections
      • 2.8.4 Control connections for SK 2xxE communication
      • 2.8.5 Colour and contact assignments for incremental encoders (HTL)
    • 2.9 Plug connectors
      • 2.9.1 Plug connectors for power connections
      • 2.9.2 Plug connectors for control connection
    • 2.10 ATEX Zone 22 for SK 2xxE
      • 2.10.1 Modified SK 2xxE for compliance with Category 3D
      • 2.10.2 Options for ATEX Zone 22 3D
        • 2.10.2.1 Technology Units for ATEX Zone 22 3D
        • 2.10.2.2 Customer Units for ATEX Zone 22 3D
        • 2.10.2.3 Hand-held Technology Units for ATEX Zone 22 3D
        • 2.10.2.4 Braking resistors
        • 2.10.2.5 Other options
      • 2.10.3 Maximum output voltage and torque reduction
      • 2.10.4 Commissioning information
      • 2.10.5 EC declaration of conformity
    • 2.11 Outdoor installation
  • 3 Options
    • 3.1 Overview of optional modules
      • 3.1.1 Overview of internal customer units SK CU4-…
      • 3.1.2 Overview of external technology units SK TU4-…
    • 3.2 Installation of optional modules
      • 3.2.1 Installation of internal customer units SK CU4-…
      • 3.2.2 Installation of external technology units SK TU4-…
        • 3.2.2.1 Dimensions
        • 3.2.2.2 Connection unit SK TI4-TU-xxx(-C)
        • 3.2.2.3 Installing the SK TI4-TU-BUS on the SK 2xxE
        • 3.2.2.4 Wall-mounting of the SK TI4-TU-…
    • 3.3 Control connections and configuration
    • 3.4 Details of internal Customer Units SK CU4-…
      • 3.4.1 Mains Unit, SK CU4-24V-…
      • 3.4.2 Potentiometer Adapter, SK CU4-POT
      • 3.4.3 SK CU4-IOE-, I/O extension
        • 3.4.3.1 Details of the control connections
        • 3.4.3.2 Configuration
        • 3.4.3.3 Signal status LEDs
        • 3.4.3.4 Termination resistor
        • 3.4.3.5 Addressing
        • 3.4.3.6 Assignment of functions
        • 3.4.3.7 Broadcast operation
      • 3.4.4 PROFIBUS DP, SK CU4-PBR
      • 3.4.5 CANopen, SK CU4-CAO
      • 3.4.6 DeviceNet, SK CU4-DEV
      • 3.4.7 Electronic brake rectifier, SK CU4-MBR
      • 3.4.8 Setpoint converter, SK CU4-REL
      • 3.4.9 Direction selection switch and potentiometer SK TIE4-SWT and SK TIE4-POT
    • 3.5 Details of external Technology Units SK TU4-…
      • 3.5.1 Connection unit SK TI4-TU-BUS /-NET / -MSW
        • 3.5.1.1 SK T14-TU-BUS connections
        • 3.5.1.2 SK TI4-TU-NET Connections
        • 3.5.1.3 Connections of the SK TI4-TU-MSW
      • 3.5.2 Mains unit, SK TU4-24V-… (only SK 2x5E)
      • 3.5.3 PotentiometerBox SK TU4-POT-…
      • 3.5.4 I/O Extension, SK TU4-IOE, ...-M12
        • 3.5.4.1 Details of the control connections
        • 3.5.4.2 Configuration
        • 3.5.4.3 Signal status LEDs
        • 3.5.4.4 Termination resistor, addressing, assignment of functions, broadcast mode
      • 3.5.5 PROFIBUS DP, SK TU4-PBR, ...-M12
      • 3.5.6 CANopen, SK TU4-CAO, ...-M12
      • 3.5.7 DeviceNet, SK TU4-DEV, ...-M12
      • 3.5.8 EtherCAT, SK TU4-ECT(-C)
      • 3.5.9 Maintenance switch, SK TU4-MSW-…
  • 4 Displays and control of the SK 2xxE
    • 4.1 Diagnostic LEDs on the Frequency Inverter
      • 4.1.1 Diagnostic LEDs on SK 2x0E (S 1 … 3)
      • 4.1.2 Diagnostic LEDs on the SK 2x0E (S 4) and SK 2x5E
    • 4.2 Overview of external control devices
      • 4.2.1 SimpleBox, SK CSX-3H
      • 4.2.2 ParameterBox SK PAR-3H
      • 4.2.3 ParameterBox parameters
      • 4.2.4 ParameterBox error messages
  • 5 Commissioning
    • 5.1 Factory settings
    • 5.2 Commissioning of the frequency inverter
      • 5.2.1 Connection
      • 5.2.2 Configuration
        • 5.2.2.1 Parameterisation
        • 5.2.2.2 DIP switch configuration Inverter (S1)
        • 5.2.2.3 DIP switch configuration, analog input (only SK 2x0E)
        • 5.2.2.4 Details of the potentiometers P1 and P2 (SK 2x0E S 4 and SK 2x5E)
      • 5.2.3 Commissioning examples
        • 5.2.3.1 SK 2x0E - Minimal Configuration
        • 5.2.3.2 SK 2x5E - Minimal Configuration
    • 5.3 KTY84-130 connection
    • 5.4 AS Interface
      • 5.4.1 The bus system
      • 5.4.2 Features
      • 5.4.3 Bus structure and technology
      • 5.4.4 Commissioning of the AS Interface
      • 5.4.5 Technical data for AS interface
      • 5.4.6 Certificate
  • 6 Parameterisation
    • 6.1 Parameterisation of frequency inverter SK 2xxE
      • 6.1.1 Operating displays
      • 6.1.2 Basic parameters (Frequency inverter)
      • 6.1.3 Motor data / characteristic curve parameters
      • 6.1.4 Speed control
      • 6.1.5 Control clamps
      • 6.1.6 Extra functions
      • 6.1.7 Positioning
      • 6.1.8 Information (Frequency inverter)
    • 6.2 Parameterisation of I/O - extension SK xU4-IOE-…
      • 6.2.1 Basic parameters (I/O - extension)
      • 6.2.2 Information (I/O - extension)
    • 6.3 Parameter overview, User settings
      • 6.3.1 Overview of frequency inverter parameters
      • 6.3.2 Parameter overview, I/O extension
    • 6.4 Parameterisation adapter SK EPG-3H
      • 6.4.1 Parameterisation adapter requirements
      • 6.4.2 Using the parameterisation adapter
      • 6.4.3 Parameterisation adapter LEDs
      • 6.4.4 Parameterisation adapter FAQs
  • 7 Operating status messages
    • 7.1 SimpleBox display
    • 7.2 Table of possible error messages
      • 7.2.1 Table of possible frequency inverter error messages
      • 7.2.2 Table of possible error messages in the I/O extension module
    • 7.3 Table of possible warning messages
    • 7.4 Table of possible reasons for the operating status "Switch-on block"
  • 8 Technical data
    • 8.1 General data for frequency inverter series SK 2xxE
    • 8.2 General data for mains/setpoint modules
    • 8.3 Electrical data for frequency inverter
      • 8.3.1 Electrical data 1~115V
      • 8.3.2 Electrical data 1~230V
      • 8.3.3 Electrical data 3~230V
      • 8.3.4 Electrical data 3~400V
  • 9 Additional information
    • 9.1 Setpoint processing in the SK 2xxE
    • 9.2 Process controller
      • 9.2.1 Process controller application example
      • 9.2.2 Process controller parameter settings
    • 9.3 Electromagnetic compatibility
    • 9.4 EMC limit value classes
    • 9.5 Reduced output power
      • 9.5.1 Increased heat dissipation due to pulse frequency
      • 9.5.2 Reduced overcurrent due to time
      • 9.5.3 Reduced overcurrent due to output frequency
      • 9.5.4 Reduced output current due to mains voltage
      • 9.5.5 Reduced output current due to the heat sink temperature
    • 9.6 Operation with FI circuit breakers
    • 9.7 System bus
    • 9.8 Energy efficiency
    • 9.9 Motor data - characteristic curves
      • 9.9.1 50Hz characteristic curve
      • 9.9.2 87Hz characteristic curve (only 400V devices)
      • 9.9.3 100Hz characteristic curve (only 400V devices)
    • 9.10 Standardisation of setpoint/actual values
    • 9.11 Definition of setpoint and actual value processing (frequencies)
    • 9.12 Maintenance and servicing information
      • 9.12.1 Maintenance Instructions
      • 9.12.2 Repair information
    • 9.13 Abbreviations in this manual
  • 10 Keyword index
• TI800_000000007_ASI_GB_1014_print
  • Supplement to Manual
    • Important supplementary information
• TI800_000000008__S1-6_COPY_BU 0200_GB_1414_print
  • Supplement to Manual
    • Explanation of the changed function:
    • Starting the copy function