Lenze EPM−T9XX Modular system - Manual (Page 111)

Terminal module
4
The modular system
4.24
L
4.24−1 EDSPM−TXXX−9.0−11/2009
4.24 Terminal module
The terminal module offers two terminal strips with 11 terminals each. All terminals
of a terminal strip are connected with each other. The terminal strips are
potential−free.
Sensors which must be supplied with external voltage, for instance, can be wired
with the help of the terminal module with a minimum of effort.
)
Note!
Designing the modular system requires the consideration of the
terminal module.
Since the backplane bus is also guided via the terminal module, it
must be considered when calculating the project stage (max. 32
modules).
l 2 terminal strips with 11 terminals each
l All terminals of a terminal strip are interconnected with each other.
l The terminal strips are potential−free
XXX
XXX
xx
epm−t108 epm−t109
Fig. 4.24−1 Overview and internal wiring of the terminal module
Description
Features
Overview