Lenze EPM−T9XX Modular system - Manual (Page 115)

8×dig. I/O compact
5
The compact system
5.1
L
5.1−1 EDSPM−TXXX−9.0−11/2009
5.1 8×dig. I/O compact
The 8×dig. I/O compact module consists of a CAN gateway which serves as an
interface to the master bus system as well as 8 digital inputs/outputs and 2
terminal strips.
The channels can be optionally used as digital inputs or outputs. Each output can
be loaded with up to 1 A. The status of the channels is displayed by LEDs.
l 8 digital inputs or outputs, depending on the circuit configuration
l Voltage supply via an external 24 V DC voltage source
l Connection to the system bus (CAN) via a 9−pole Sub−D plug
l Address and baud rate setting via coding switch
l The baud rate is stored permanently in an EEPROM in the module
l LEDs display the status
0
1
1
2
3
5 4
0
epm−t040
Fig. 5.1−1 8×dig. I/O compact
0 LEDs for status display
1 9−pole Sub−D plug for connection to the system bus (CAN)
2
Coding switch to set address and baud rate
3 External voltage supply connection
4
Terminal strip for digital input/output signals
5 Terminal strips, additional terminals for wiring
Description
Features
Overview