Lenze EPM−T9XX Modular system - Manual (Page 407)

Transmitting parameter data
12
Parameter setting via system bus (CAN) / CANopen
12.7
L
12.7−1 EDSPM−TXXX−9.0−11/2009
12.7 Transmitting parameter data
If you change parameters (e. g. monitoring times in the index I2400
h
), the new
settings must be saved non−volatilely via index I2003
h
. The settings continue to
exist after disconnecting the supply voltage.
Step Action Note
1. Save changes Set index I2003
h
= 1