Lenze EPM−T9XX Modular system - Manual (Page 83)

4×analog output
4
The modular system
4.17
L
4.17−3 EDSPM−TXXX−9.0−11/2009
Type 4×analog output
Voltage supply DC 5 V / 30 mA (via backplane bus)
External voltage supply DC 24 V / 200 mA (DC 19.2 ... 28.8 V)
Connectable cable cross−section £ 2.5 mm 2 ( ³ AWG 14)
Analog outputs
Number 4 outputs
Analog−to−digital converter 12 bits
Output ranges
Voltage −10 ... +10 V
+1 ... +5 V
0 ... +10 V
Information on tolerances can be
found in the chapter "Parameter
setting"
Current −20 ... +20 mA
+4 ... +20 mA
0 ... +20 mA
Actuator − input resistance
Voltage range min. 1 k W (output current max. 10 mA)
Current range min. 500 W (output current max. 20 mA)
Delay time 10 ms
Electrical isolation from backplane bus Yes, via optocouplers
Communication
Output data 8 bytes (2 bytes per analog output)
Parameter data 6 bytes
Diagnostic data 4 bytes
Dimensions
Width 25.4 mm
Height 76.0 mm
Depth 76.0 mm
Weight 100 g
Order number EPM−T320
Technical data