Lenze EPM−T9XX Modular system - Manual (Page 93)

4×analog input / output
4
The modular system
4.20
L
4.20−1 EDSPM−TXXX−9.0−11/2009
4.20 4×analog input / output
The module 4×analog input / output has two analog inputs and two analog outputs
which can be parameterised individually. The analog inputs and outputs are
isolated from the backplane bus and the voltage supply.
)
Note!
The chapter "Parameter setting" describes how to parameterise
the module.
l 2 analog inputs
l 2 analog outputs
l DC 24 V supply voltage
l The inputs and outputs can be parameterised individually
l Input ranges: Voltage, current
l Output ranges: Voltage, current
l LED diagnostics displays a wire breakage in the current measuring range
0
1
2
epm−t015
Fig. 4.20−1 Overview of 4×analog input / output
0
LED for status display
1 Bit address label card
2 Plug−in terminal strip
Description
Features
Overview