Lenze EPM−T9XX Modular system - Manual (Page 87)

4×analog output ±10V
4
The modular system
4.18
L
4.18−3 EDSPM−TXXX−9.0−11/2009
Type 4×analog output ±10V
Voltage supply DC 5 V / 60 mA (via backplane bus)
External voltage supply DC 24 V / 100 mA (DC 19.2 ... 28.8 V)
Connectable cable cross−section £ 2.5 mm 2 ( ³ AWG 14)
Analog outputs
Number 4 outputs
Analog−to−digital converter 12 Bit
Output range
Voltage −10 ... +10 V Information on tolerances can be
found in the chapter "Parameter
setting"
Actuator − input resistance > 5 k W
Output current < 6 mA
Delay time per channel 450 ms
Electrical isolation from backplane bus Yes, via optocouplers
Communication
Output data 8 bytes (2 bytes per analog output)
Dimensions
Width 25.4 mm
Height 76.0 mm
Depth 76.0 mm
Weight 100 g
Order number EPM−T321
Technical data