Lenze EPM−T9XX Modular system - Manual (Page 61)

4×relay
4
The modular system
4.12
L
4.12−1 EDSPM−TXXX−9.0−11/2009
4.12 4×relay
The module 4×relay detects the binary control signals from the master bus system
and transports them to the process level via the outputs. The module has four
relays with a switch each (NO contact).
)
Note!
The chapter "Parameter setting" describes how to parameterise
the module.
l Four isolated relay outputs
l Up to 230 V AC or up to 30 V DC contact voltage
l Max. 5 A contact current
l Suitable for motors, lamps, solenoid valves and DC contactors
l LED displays the switching states
0
1
2
epm−t015
Fig. 4.12−1 Overview of 4×relay
0
LED for status display
1 Bit address label card
2
Plug−in terminal strip
Description
Features
Overview